Cat Anti-Climb Tree Guard Baffle Kit

Keep your pet safe and grounded with our Purrfect Fence Tree Guard! Our innovative anti tree-climbing kit uses durable brown-coated metal flashing to wrap the trunk of a tree with a smooth metal surface that cats, pets, and other critters cannot dig their claws into, keeping them safely on the ground. Our solution is meant to protect from:

• Cats/pets climbing too high and getting stuck in trees where they cannot safely descend.
• Your pet climbing a tree near a fence line and being able to escape the safety of your yard.
• Keep other critters and/or some predators (squirrels, rats, opossums, etc.) from easily climbing trees in your yard.

Spindles Used

The wood spindle is attached to the tree with 3 screws and then the metal flashing is wrapped around the trunk and fastened to the spindle. 

Guideline for number of trees each kit can wrap

Small Tree Kit: includes materials for wrapping 1 tree up to 28″ around. 10′ of flashing and 1 wood spindle included.

Mid-Size Tree Kit: includes 25′ of flashing and 5 wood spindles. This kit can wrap a tree that is between 29″ and 60″ around.

• NOTE: Depending on the size of your tree, you may be able to wrap more than one tree with this kit.

Large/Multi Tree Kit: includes 50′ of flashing and 12 wood spindles. This kit can wrap several trees of varying sizes. Some examples are below:

• 7 trees that are all 17″ around or less
• 6 trees that are all 20″ around or less
• 5 trees that are all 28″ around or less (additional wood spindles may be needed)
• 4 trees that are all between 24″ and 39″ around
• 3 trees that are all between 40″ and 54″ around
• 2 trees that are both between 55″ and 75″ around, with enough left over for 1 small tree
• 2 trees that are both between 74″ and 88″ around

Small Tree Kit:

• (1) 10’L x 14″H brown coated aluminum flashing roll
• (4) #8 x 2.5″ Screws
• (1) #2 Square Driver Bit (for #8×2.5″ screws)
• (1) 34″ Wood Spindle
• (10) #8 x 1.25″ Screws
• (1) 1/8″ Drill Bit (for drilling pilot holes)

Mid-Size Tree Kit:

• (1) 25’L x 14″H brown coated aluminum flashing roll
• (20) #8 x 2.5″ Screws
• (1) #2 Square Driver Bit (for #8×2.5″ screws)
• (5) 34″ Wood Spindle
• (40) #8 x 1.25″ Screws
• (1) 1/8″ Drill Bit (for drilling pilot holes)

Multi-Tree Kit:

• (1) 50’L x 14″H brown coated aluminum flashing roll
• (45) #8 x 2.5″ Screws
• (1) #2 Square Driver Bit (for #8×2.5″ screws)
• (12) 34″ Wood Spindle
• (100) #8 x 1.25″ Screws
• (1) 1/8″ Drill Bit (for drilling pilot holes)